Rheological behaviour of two-phase flow of solid particles in a gas

The present investigation was concerned with the rheological behaviour of dilute suspensions of solid particles in a gas in a vertical cocurrent flow moving upwards. Starting from the experimentally determined dependence of the pressure drop on the concentration of solid particles and the Reynolds number of the carrier medium in the steady flow region, the rheological parameters were estimated using pseudo-shear diagrams. Air was the carrier medium and the dispersed phase was one of six fractions of polypropylene powder and five fractions of glass ballotini. The results show that the investigated two-phase systems have pseudoplastic character which becomes more pronounced with increases in concentration, equivalent diameter and density of solid particles in the flowing suspension. C _d coefficient of particle resistance - d _e equivalent diameter of particles - D column diameter - Fr Froude number - g gravitational acceleration - K rheological parameter - L length - n rheological parameter - p _t pressure drop due to friction - p _m total pressure drop - p _ag pressure drop due to acceleration of the gas phase - p _as pressure drop due to acceleration of the solid phase - p _g hydrostatic pressure of the gas phase - p _s specific effective weight of the dispersed phase - r radius - Re Reynolds number - Re _p Reynolds number of a particle - Re _G generalized Reynolds number - Re _G1 generalized Reynolds number relating to the end of the laminar flow region - Re _G2 generalized Reynolds number relating to the beginning of the turbulent flow region - w _z axial component of velocity - u _t steady free-fall velocity of a single particle - w average velocity - w _g average velocity of the gas phase - w _s average velocity of the dispersed phase of solid particles - relative mass fraction of solid particles - x _s volume fraction of solid particles - _g coefficient of pressure drop due to friction - µ dynamic viscosity - _g density of the gas phase - _m density of the suspension - _s density of solid particles - _ds density of the dispersed phase - _w shear stress at the wall     

C_2H_2分解爆轰的实验研究

在长30m,公称直径(Dg)分别为50、65、80和100mm的管道内,进行了C_2H_2分解爆轰实验。用O_2—C_2H_2爆轰波引爆C_2H_2,测量了管道内的爆轰压力,及在管道端面上的反射压力。与以前认为在管径500mm管道内不会出现自持的C_2H_2分解爆轰的意见相反,在这样的管道内也发生了C_2H_2分解炸轰。在管端测到了1700kg/cm~2的异常高压,并对数次异常高压的破坏威力作了记录。     

Vorticity characteristics of the turbulent intermediate wake

Measurements of the lateral components _j (j=2 and 3) of the vorticity fluctuation vector have been made, using a vorticity probe consisting of two X-wires, in the intermediate wake of a circular cylinder. The effect of the spatial resolution of the probe on the measurement of _j has been studied. As the spatial resolution impairs, the variance and flatness factor of _j decrease whereas the skewness of _j increases. Reasonably accurate values of _j ² can be obtained by applying spectral corrections for the spatial resolution effect.Near the beginning of the intermediate wake, the variance of ₂ is larger than that of ₃ due to the significant contribution from ribs which connect consecutive spanwise roll vortices. This difference decreases with downstream distance. Also, the presence of the rolls is reflected by a local extremum in the skewness of ₃ on each side of the wake centerline. The magnitude of the extremum decreases with downstream distance.The support of the Australian Research Council is gratefully acknowledged.     

近场波动模拟的一种应力人工边界

采用平面波和远场散射波混合透射，引入无限介质线弹性本构关系建立了一种应力人工 边界条件. 其优点在于边界结点反应与内部有限元结点反应采用相同的积分格式计算，有限 元积分方法稳定时不存在人工边界失稳问题. 数值算例表明：边界精度高于现有黏性边 界、黏弹性人工边界，以及一、二阶透射人工边界.     

Strain hardening behavior of polymer blends with fibril morphology

We investigate the rheological behavior of the polymer blends with fibril morphology, with special focus on the effect of fibril morphology on the extensional properties under uniaxial extension. We add a small amount of the dispersed phase to the matrix, and control the blend morphology by changing the viscosity ratio. When the fibril morphology is maintained, the blend shows not only a significant increase of the extensional viscosity but the strain hardening behavior. The extensional viscosity increases depending on the aspect ratio of the fibers, while the strain hardening behavior originates from the restricted stretching of deformable fibers, which has been confirmed theoretically by introducing the concept of rigidity of the fiber. It suggests a way to induce the strain hardening behavior by introducing deformable fibrils into the matrix, that is, by the design of polymer blends with a small amount of dispersed phase such that the fibril structure is maintained.     

Three-dimensional viscoelastic simulation of coextrusion process: comparison with experimental data

 Three-dimensional numerical simulation of viscoelastic coextrusion process has been performed and numerical results were compared with the experimental data of Karagiannis et al. (1990). By varying the magnitude of the second normal stress difference and its ratio of Fluid I and Fluid II, we were able to control the interface profile and the degree of encapsulation along the downstream direction. By increasing the parameter α (α_Fluid I=α_Fluid II) from 0.1 to 0.4 in the Giesekus model and increasing the α ratio (α_Fluid Iα_Fluid II) between Fluid I and Fluid II from 2.0 to 4.0 in the permissible range of realistic polymeric systems, the interface profile and the degree of encapsulation along the downstream direction were fitted with the experimental results. There was little difference between the numerical results and the experimental data in the interface profile and the degree of encapsulation along the downstream direction when the α ratio was set to 3.0 (0.3:0.1). Fluid I with larger magnitude of the second normal stress difference protrudes into Fluid II with smaller magnitude of the second normal stress difference around the symmetric plane, while Fluid II wraps around Fluid I near the side walls. As the ξ ₁ ratio (ξ _{1 ,Fluid I}ξ _{1 ,Fluid II}) increases from 1.0 to 3.0 for the two-mode Phan-Thien and Tanner model, it was found that the curvature of the interface profile increased, and the difference between the numerical results and the experimental data in the interface profile and the degree of encapsulation along the downstream direction was almost negligible when the ξ ₁ ratio was set to 3.0 (0.54:0.18). Although the parameters of viscoelastic models were fitted by using the shear viscosity data only, quantitative agreements between the numerical results and the experimental coextrusion data were quite satisfactory. Received: 24 April 2001 Accepted: 5 June 2001     

Release Property of Alginate Beads Coated with Poly(N-isopropylacrylamide-co-dimethylaminoethylmethacrylate)

Alginate beads were coated with copolymers of N-isopropylacrylamide and dimethylaminoethylmethacrylate (P(NIPAM-co-DMAEMA)s) by taking advantage of electrostatic interaction between alginate and the copolymer. The copolymers, of which DMAEMA contents in the feed for the copolymerization were 5.0% (PND 5) and 15.0% (PND 15), were employed for the coatings of alginate beads. The adsorption curve of PND 5 and PND 15 on the surface of alginate beads seemed to be Langmuir isotherm. The beads were coated in the PND solutions (2%, pH 5.0 or pH 7.0) and the amounts of adsorption (g PND/g alginate) were about 1.3 with PND 5 solution (pH 5.0), 1.2 with PND 15 solution (pH 5.0), and 0.75 with PND 15 (pH 7.0). The release from the beads coated with PNDs were observed at 30°C, 37°C, and 45°C using amaranth or FITC-dextran as a dye. The degrees of release were significantly suppressed due to the coating layers of PNDs. However, the coating layers could hardly act as a controller for the temperature-sensitive release.     

Autophagic failure promotes the exocytosis and intercellular transfer of α-synuclein

The accumulation of abnormal protein aggregates is a major characteristic of many neurodegenerative disorders, including Parkinson''s disease (PD). The intracytoplasmic deposition of α-synuclein aggregates and Lewy bodies, often found in PD and other α-synucleinopathies, is thought to be linked to inefficient cellular clearance mechanisms, such as the proteasome and autophagy/lysosome pathways. The accumulation of α-synuclein aggregates in neuronal cytoplasm causes numerous autonomous changes in neurons. However, it can also affect the neighboring cells through transcellular transmission of the aggregates. Indeed, a progressive spreading of Lewy pathology among brain regions has been hypothesized from autopsy studies. We tested whether inhibition of the autophagy/lysosome pathway in α-synuclein-expressing cells would increase the secretion of α-synuclein, subsequently affecting the α-synuclein deposition in and viability of neighboring cells. Our results demonstrated that autophagic inhibition, via both pharmacological and genetic methods, led to increased exocytosis of α-synuclein. In a mixed culture of α-synuclein-expressing donor cells with recipient cells, autophagic inhibition resulted in elevated transcellular α-synuclein transmission. This increase in protein transmission coincided with elevated apoptotic cell death in the recipient cells. These results suggest that the inefficient clearance of α-synuclein aggregates, which can be caused by reduced autophagic activity, leads to elevated α-synuclein exocytosis, thereby promoting α-synuclein deposition and cell death in neighboring neurons. This finding provides a potential link between autophagic dysfunction and the progressive spread of Lewy pathology.     

Enhancing the electrochemical performance of Li1.2Ni0.2Mn0.6O2 by surface modification with nickel–manganese composite oxide

Li-rich layered Li_1.2Ni_0.2Mn_0.6O₂ has been surface modified by nickel–manganese composite oxide (Ni_0.5Mn_1.5O _x ) to serve as a novel cathode material with novel layered spinel structure for lithium-ion battery. The as-prepared Li_1.2Ni_0.2Mn_0.6O₂ before and after surface modification by Ni_0.5Mn_1.5O _x as well as simply blended Li_1.2Ni_0.2Mn_0.6O₂ with spinel LiNi_0.5Mn_1.5O₄, have been characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electronic microscopy, and differential scanning calorimetry. Electrochemical studies indicate that the Ni_0.5Mn_1.5O _x surface modified Li_1.2Ni_0.2Mn_0.6O₂ with peculiar layered spinel character dramatically represented increased discharge capacity, improved cycling stability as well as excellent rate capability at high-voltage even up to 5.0 V.     

Passive Advection in a Percolation Process: Two-Loop Approximation

Theoretical and Mathematical Physics - We study an instructive model of the directed percolation process near its second-order phase transition between absorbing and active states. We first express...